| Stage of Development: Dormant | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| mineral oil (Purespray Green) 27666 | NC | 20 L per 1000 L water (2% solution) | 20 L per 1000 L water (2% solution) | 12 h | 0 | Do not use within 14 days of sulphur or captan fungicide. Do not apply just prior to or during freezing temperatures or rain. May cause bark damage on Red Delicious. Maximum 2 dormant applications. Application interval: 10-14 days if summer spray applications are expected during the growing season. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: 15 mm Green to Tight Cluster | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| sulfoxaflor (Closer) 30826 | 4C | 100-200 mL | 40-80 mL | 12 h | 7 | Do not apply more than 2 times/season. Spray interval: minimum 7 days. |
| afidopyropen (Versys) 33266 | 9D | 0.1 L | 0.04 L | 12 hrs | 7 days | Allow 7 days between applications. Do not apply more than 4 times per season. For resistance management, rotate with another insecticide group after 2 applications. |
| mineral oil (Purespray Green) 27666 | NC | 10 L/1000 L water (1% solution) | 10 L/1000 L water (1% solution) | 12 h | 0 | Do not use within 14 days of sulphur or captan fungicide. Do not apply just prior to or during freezing temperatures or rain. May cause bark damage on Red Delicious. Maximum 2 dormant applications. Application interval: 10-14 days if summer spray applications are expected during the growing season. |
| spidoxamat (Plenexos Care) 35868 | 23 | 1.0 - 1.5 kg | 0.4 - 0.61 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| flupyradifurone, spidoxamat (Plenexos Smart) 35867 | 4D, 23 | 0.65 - 1.0 kg | 0.26 - 0.40 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: Summer | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| acetamiprid (Assail) 27128 | 4 | 80-120 g | 32-48 g | 12 h-6 days | 7 | Do not apply this products alone or alternately with other Group 4 products more than twice/season (see additional notes). Will also control white apple leafhopper. Spray interval - 12 days. REIs of 2 days for scouting and 6 days is for thinning. |
| sulfoxaflor (Closer) 30826 | 4C | 100-200 mL | 40-80 mL | 12 h | 7 | Do not apply more than 2 times/season. Spray interval: minimum 7 days. |
| spirotetramat (Movento 240 SC) 28953 | 23 | 365- 435 mL | 148- 176 mL | 12 h | 7 | Apply Movento with an adjuvant such as Agral 90. Do not exceed 1830 mL Movento/ha (741 mL/acre) per season. Also controls woolly apple aphid. Toxic to bees. Spray interval: minimum 14 days. |
| flonicamid (Beleaf) 29796 | 29 | 160 g | 65 g | 12 h-2 days | 21 | Experience in the field indicates there may be issues with current label rate. 2 days REI for thinning. |
| malathion (Malathion 85E) 8372 | 1B | 610 - 880 mL/1000 L | 12 hr - 3 days | 3 | This product is harmful to beneficial insects that attack aphids. Apply the spray mixture in sufficient volume to ensure thorough coverage. Only two applications per year. Spray interval: 10 days. | |
| cyantraniliprole (Exirel) 30895 | 28 | 750- 1500 mL | 304- 607 mL | 12 h | 3 | Do not apply more than 4 times/season. Do not tank mix with Sovran, Flint, Pristine, copper or captan fungicides. Toxic to bees.Spray interval: 10 to 14 days. |
| flupyradifurone (Sivanto Prime) 31452 | 4D | 500-750 mL | 202-304 mL | 12 h | 14 | Minimum interval between applications: 10 days. Maximum amount per season: 2000 mL/ha (810 mL/acre). |
| afidopyropen (Versys) 33266 | 9D | 0.1 L | 0.04 L | 12 hrs | 7 days | Allow 7 days between applications. Do not apply more than 4 times per season. For resistance management, rotate with another insecticide group after 2 applications. |
| Mineral oil (Suffoil-X) 33099 | NC | 10 L/1000 L of water | 10 L/1000 L of water | 12 hours | 0 | Test for crop tolerance before widespread use. Apply every 10 - 14 days,depending on level of pest pressure. Do not use within 14 days before or after captan fungicide. Do not apply more than 8 applications per year. |
| tetraniliprole (Vayego 200 SC) 33711 | 28 | 150 ml | 61 ml | 12 hours | 7 days | Suppression only. Max 3 applications per year. Toxic to bees. Do not apply during pre-bloom or blooming period. Apply post-bloom only. |
| acetamiprid + novaluron (Cormoran) 33353 | 4 + 15 | 700 - 1050 ml | 283 - 425 ml | 12 hrs to 7 days | 14 days | Do not apply more than 6.9 L/ha. Spray interval - 12 days. REIs: 7 days for thinning, 12 hours for all other activities. |
| mineral oil (Purespray Green) 27666 | NC | 10 L/1000 L water (1% solution) | 10 L/1000 L water (1% solution) | 12 h | n/a | Do not use within 14 days before or after captan or sulphur. |
| mineral oil (Double Down Spray Oil) 33589 | NC | 10 L | 4 L | 12 h | Apply only the lower rate during summer. The rate may be increased post-harvest to reduce overwintering pressure. Do not use within 14 days of sulphur or captan. | |
| spidoxamat (Plenexos Care) 35868 | 23 | 1.0 - 1.5 kg | 0.4 - 0.61 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| flupyradifurone, spidoxamat (Plenexos Smart) 35867 | 4D, 23 | 0.65 - 1.0 kg | 0.26 - 0.40 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: Post-Harvest | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| mineral oil (Purespray Green) 27666 | NC | 10 L/1000 L water (1% solution) | 10 L/1000 L water (1% solution) | 12 h | n/a | Do not use within 14 days before or after captan or sulphur. |
| mineral oil (Double Down Spray Oil) 33589 | NC | 10 - 20L | 4 - 8.1 L | 12 h | Do not use within 14 days before or after captan or sulphur. | |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.