| Stage of Development: Petal Fall to Husk Fall | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| spirotetramat (Movento 240 SC) 28953 | 23 | 365 -585 mL | 148-237 mL | 12 h | 7 | Apply Movento with an adjuvant such as Agral 90. Do not exceed 1120 mL Movento/ha (453 mL/ac)/season. Toxic to bees.Spray interval: minimum 14 days. |
| spidoxamat (Plenexos Care) 35868 | 23 | 1.5 - 2.0 kg | 0.61 - 0.81 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| flupyradifurone, spidoxamat (Plenexos Smart) 35867 | 4D, 23 | 1.0 - 1.35 kg | 0.40 - 0.55 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| Notes: Admire used against other pests at petal fall will also provide control of mealybugs. Use high volume air-blast or hand gun applications. | ||||||
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: Post-Harvest | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| Notes: See notes. See description of mealybugs. | ||||||
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: Husk Fall | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| spirotetramat (Movento 240 SC) 28953 | 23 | 365-585 mL | 148-237 mL | 12 h | 7 | Apply Movento with an adjuvant such as Agral 90. Do not exceed 1120 mL Movento/ha (453 mL/ac)/season. Toxic to bees. Spray interval: minimum 14 days. |
| spidoxamat (Plenexos Care) 35868 | 23 | 1.5 - 2.0 kg | 0.61 - 0.81 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| flupyradifurone, spidoxamat (Plenexos Smart) 35867 | 4D, 23 | 1.0 - 1.35 kg | 0.40 - 0.55 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: Husk Fall | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| spirotetramat (Movento 240 SC) 28953 | 23 | 365-585 mL | 148-237 mL | 12 h | 7 | Apply Movento with an adjuvant such as Agral 90. Do not exceed 1120 mL Movento/ha (453 mL/ac)/season. Toxic to bees. Spray interval: minimum 14 days. |
| spidoxamat (Plenexos Care) 35868 | 23 | 1.5 - 2.0 kg | 0.61 - 0.81 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| flupyradifurone, spidoxamat (Plenexos Smart) 35867 | 4D, 23 | 1.0 - 1.35 kg | 0.40 - 0.55 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: Summer | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| spirotetramat (Movento 240 SC) 28953 | 23 | 365-585 mL | 148-237 mL | 12 h | 7 | Apply Movento with an adjuvant such as Agral 90. Do not exceed 1120 mL Movento/ha (453 mL/ac)/season. Toxic to bees. Spray interval: minimum 14 days. |
| spidoxamat (Plenexos Care) 35868 | 23 | 1.5 - 2.0 kg | 0.61 - 0.81 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| flupyradifurone, spidoxamat (Plenexos Smart) 35867 | 4D, 23 | 1.0 - 1.35 kg | 0.40 - 0.55 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: Summer | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| spirotetramat (Movento 240 SC) 28953 | 23 | 365-585 mL | 148-237 mL | 12 h | Apply Movento with an adjuvant such as Agral 90 after. Minimum interval between applications: 14 days. Maximum 1.83 L/ha (741 mL/acre) per season. | |
| spidoxamat (Plenexos Care) 35868 | 23 | 1.5 - 2.0 kg | 0.61 - 0.81 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| flupyradifurone, spidoxamat (Plenexos Smart) 35867 | 4D, 23 | 1.0 - 1.35 kg | 0.40 - 0.55 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: Summer | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| spirotetramat (Movento 240 SC) 28953 | 23 | 365-585 mL | 148-237 mL | 12 h | Apply Movento with an adjuvant such as Agral 90. Do not exceed 1120 mL Movento/ha (453 mL/ac)/season. Toxic to bees. Spray interval: minimum 14 days. | |
| spidoxamat (Plenexos Care) 35868 | 23 | 1.5 - 2.0 kg | 0.61 - 0.81 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| flupyradifurone, spidoxamat (Plenexos Smart) 35867 | 4D, 23 | 1.0 - 1.35 kg | 0.40 - 0.55 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: Summer | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| spirotetramat (Movento 240 SC) 28953 | 23 | 365-585 mL | 148-237 mL | 12 h | Maximum interval between applications: 14 days. Do not apply more than 1.83 L/ha (729 mL/acre) pr season. DO NOT use on pear trees when fruit is present due to the possibility of adverse effects on the fruit. | |
| spidoxamat (Plenexos Care) 35868 | 23 | 1.5 - 2.0 kg | 0.61 - 0.81 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| flupyradifurone, spidoxamat (Plenexos Smart) 35867 | 4D, 23 | 1.0 - 1.35 kg | 0.40 - 0.55 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.