| Stage of Development: Dormant | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| mineral oil (Purespray Green) 27666 | NC | 20 L per 1000 L water (2% solution) | 20 L per 1000 L water (2% solution) | 12 h | 0 | Do not use within 14 days of sulphur or captan fungicide. Do not apply just prior to or during freezing temperatures or rain. May cause bark damage on Red Delicious. Maximum 2 dormant applications. Application interval: 10-14 days if summer spray applications are expected during the growing season. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: 15 mm Green to Tight Cluster | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| sulfoxaflor (Closer) 30826 | 4C | 400 mL | 162 mL | 12 h | 7 | Suppression only. Do not apply more than 2 times/season. Spray interval: minimum 7 days. |
| mineral oil (Purespray Green) 27666 | NC | 10L/1000 L of Water (1% solution) | 10L/1000 L of Water (1% solution) | 12 h | 0 | Do not use within 14 days of sulphur or captan fungicide. Do not apply just prior to or during freezing temperatures or rain. May cause bark damage on Red Delicious. Maximum 2 dormant applications. Application interval: 10-14 days if summer spray applications are expected during the growing season. |
| cold pressed orange oil (Appeal) 35946 | N/A | 600 ml/100 L water | 600 ml/100 L water | 4 h | 0 | Apply a water volume of 500 - 1000 L/ha. If treatment begins on an established infestation, tank mix with a registered systemic residual insecticide. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: Summer | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| malathion (Malathion 85E) 8372 | 1B | 610 mL /1000 L | 24 h* | 3 | This product is harmful to beneficial insects that attack aphids. Apply the spray mixture in sufficient volume to ensure thorough coverage. Only two applications per year. Spray interval: 10 days. | |
| sulfoxaflor (Closer) 30826 | 4C | 400 mL | 162 mL | 12 h | 7 | For suppression only. Do not apply more than twice/season. Spray interval: minimum 7 days. |
| flonicamid (Beleaf) 29796 | 29 | 160 g | 65 g | 12 h-2 days | 21 | Experience in the field indicates there may be issues with current label rate. 2 days REI for thinning. |
| Mineral oil (Suffoil-X) 33099 | NC | 10 L/1000 L of water | 10 L/1000 L of water | 12 hours | 0 | Test for crop tolerance before widespread use. Apply every 10 - 14 days,depending on level of pest pressure. Do not use within 14 days before or after captan fungicide. Do not apply more than 8 applications per year. |
| tetraniliprole (Vayego 200 SC) 33711 | 28 | 150 ml | 61 ml | 12 hours | 7 days | Suppression only. Max 3 applications per year. Toxic to bees. Do not apply during pre-bloom or blooming period. Apply post-bloom only. |
| acetamiprid + novaluron (Cormoran) 33353 | 4 + 15 | 700 - 1050 ml | 283 - 425 ml | 12 hrs to 7 days | 14 days | Do not apply more than 6.9 L/ha. Spray interval - 12 days. REIs: 7 days for thinning, 12 hours for all other activities. |
| spirotetramat (Movento 240 SC) 28953 | 23 | 420 - 585 ml | 170 - 237 ml | 12 h | 7 days | Apply post bloom, after petal fall, when monitoring indicates that populations are present. |
| flupyradifurone, spidoxamat (Plenexos Smart) 35867 | 4D, 23 | 1.0 - 1.35 kg | 0.40 - 0.55 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| cold pressed orange oil (Appeal) 35946 | N/A | 600 ml/100 L water | 600 ml/100 L water | 4 h | 0 | Apply a water volume of 500 - 1000 L/ha. If treatment begins on an established infestation, tank mix with a registered systemic residual insecticide. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.
| Stage of Development: Summer | ||||||
|---|---|---|---|---|---|---|
| Recommended Product Choices | Grp1 | Amount per | REI2 | PHI3 (days) | Precautions and Notes | |
| Ha | Acre... | |||||
| Mineral oil (Suffoil-X) 33099 | NC | 10 L/1000 L of water | 10 L/1000 L of water | 12 hours | 0 | Test for crop tolerance before widespread use. Apply every 10 - 14 days,depending on level of pest pressure. Do not use within 14 days before or after captan fungicide. Do not apply more than 8 applications per year. |
| tetraniliprole (Vayego 200 SC) 33711 | 28 | 150 ml | 61 ml | 12 hours | 7 days | Suppression only. Max 3 applications per year. Toxic to bees. Do not apply during pre-bloom or blooming period. Apply post-bloom only. |
| flupyradifurone, spidoxamat (Plenexos Smart) 35867 | 4D, 23 | 1.0 - 1.35 kg | 0.40 - 0.55 kg | 12 h | 14 days | Toxic to bees. DO NOT apply during the crop blooming period. Apply as early as populations begin to develop or at early threshold for the target pest. Use higher rates for moderate to heavy insect pressure or for longer residual control. If applying spidoxamat as both a soil and foliar treatment in the same year, only one soil and one foliar application are allowed. |
| spidoxamat (Velancor) 35866 | 23 | 270 g | 54.7 - 109.3 g | 12 h | 28 d | Toxic to bees. DO NOT apply during the crop blooming period. Apply the specified rate through chemigation into the root zone using low pressure drip, trickle, micro-sprinkler, or similar systems. Use higher rates for moderate to heavy insect pressure or for longer residual control. Suppression only. |
| cold pressed orange oil (Appeal) 35946 | N/A | 600 ml/100 L water | 600 ml/100 L water | 4 h | 0 | Apply a water volume of 500 - 1000 L/ha. If treatment begins on an established infestation, tank mix with a registered systemic residual insecticide. |
1Group number for resistance management. NC = not classified.
2Re-entry interval on the label. An asterisk(*) indicates that no re-entry is shown on the label, but the WorkSafe BC re-entry interval may apply and is shown.
3Pre-harvest interval. Note: always read and follow the directions on the pesticide label.